Publications
Journal Publications
Year 2021
1. (Co-corresponding) J. S. Park, H. J. Choi, G. D. Han, J. Koo, E. H. Kang, D. H. Kim, K. Bae, J. H. Shim, “High–performance protonic ceramic fuel cells with a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode with palladium–rich interface coating”, Journal of Power Sources, 2021, 482, 229043
2. (Co-first) S. Chaikasetsin, T. Kodama, K. Bae, J. Y. Jung, J. Shin, B. C. Lee, B. S. Y. Kim, J. Seo, U. Sim, F. B. Prinz, K. E. Goodson, W. Park, “Thermal expansion characterization of thin films using harmonic Joule heating combined with atomic force microscopy”, Applied Physics Letters, 2021, 118, 194101
Year 2020
1. (Co-first) J. Park, K. Bae, T. R. Kim, C. Perez, A. Sood, M. Asheghi, K. E. Goodson, W. Park, “Direct quantification of heat generation at the nanometer scale by the inelastic scattering of an electron beam”, Advanced Science, 2020, 8(3), 2002876
2. (Co-first) G. D. Han, K. Bae, E. H. Kang, H. J. Choi, J. H. Shim, “Inkjet Printing for Manufacturing Solid Oxide Fuel Cells”, ACS Energy Letters, 2020, 5(5), 1586-1592
3. (Co-corresponding) E. H. Kang, H. R. Choi, J. S. Park, K. H. Kim, D. H. Kim, K. Bae, F. B. Prinz, J. H. Shim, “Protonic ceramic fuel cells with slurry-spin coated BaZr0.2Ce0.6Y0.1Yb0.1O3-d thin-film electrolytes”, Journal of Power Sources, 2020, 465, 31, 228254
Year 2019
1. H. J. Choi, G. D. Han, K. Bae, J. H. Shim, “Highly Active Oxygen Evolution on Carbon Fiber Paper Coated with Atomic Layer-deposited Cobalt Oxide”, ACS applied materials & interfaces, 2019, 11(11), 10608-10615
2. K. Bae, D. Y. Jang, J. S. Park, J.-W. Son, F. B. Prinz, J. H. Shim, “Direct Measurement of Ion Diffusivity in Oxide Thin Film by Using Isotope Tracers and Secondary Ion Mass Spectrometry”, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, 7, 405-410
Year 2018
1. H. J. Choi, K. Bae, S. Grieshammer, G. D. Han, S. W. Park, J. W. Kim, D. Y. Jang, J. Koo, J.‐W. Son, M. Martin, J. H. Shim, “Surface Tuning of Solid Oxide Fuel Cell Cathode by Atomic Layer Deposition”, Advanced Energy Materials, 2018, 8(33), 1802506
2. D. H. Kim, K. Bae, H. J. Choi, J. H. Shim, “Ag surface-coated with nano-YSZ as an alternative to Pt catalyst for low-temperature solid oxide fuel cells” Journal of Alloys and Compounds, 2018, 769, 545-551
3. K. Bae, D. H. Kim, H. J. Choi, J.-W. Son, J. H. Shim, “High-Performance Protonic Ceramic Fuel Cells with 1 μm Thick Y:Ba(Ce, Zr)O3 Electrolytes”, Advanced Energy Materials, 2018, 8(25), 1801315
4. K. Bae, J. W. Kim, J.-W. Son, T. Lee, S. Kang, F. B. Prinz, J. H. Shim, “3D Evaluation of Porous Zeolite Absorbents Using FIB-SEM Tomography”, International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, 5(2), 195-199
5. J. W. Kim, K. Bae, H. J. Kim, J.-W. Son, N. Kim, S. Stenfelt, F. B. Prinz, J. H. Shim, “Three-dimensional thermal stress analysis of the re-oxidized Ni-YSZ anode functional layer in solid oxide fuel cells”, Journal of Alloys and Compounds, 2018, 752, 148-154
Year 2017
1. G. D. Han, H. J. Choi, K. Bae, H. R. Choi, D. Y. Jang, J. H. Shim, “Fabrication of Lanthanum Strontium Cobalt Ferrite–Gadolinium-Doped Ceria Composite Cathodes Using a Low-Price Inkjet Printer”, ACS Applied Materials & Interfaces, 2017, 9(45), 39347-39356
2. D. Y. Jang, M. Kim, J. W. Kim, K. Bae, J.-W. Son, M. V. F. Schlupp, J. H. Shim, “High Performance Anode-Supported Solid Oxide Fuel Cells with Thin Film Yttria-Stabilized Zirconia Membrane Prepared by Aerosol-Assisted Chemical Vapor Deposition”, Journal of The Electrochemical Society, 2017, 164(6), F484-F490
3. K. Bae, D. Y. Jang, H. J. Choi, J. Hong, B.-K. Kim, J.-H. Lee, J.-W. Son, J. H. Shim, “Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells”, Nature Communications, 2017, 8, 14553
Year 2016
1. H. J. Kim, M. Kim, K. C. Neoh, G. D. Han, K. Bae, J. M. Shin, G.-T. Kim, J. H. Shim, “Slurry spin coating of thin film yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolytes for solid oxide fuel cells”, Journal of Power Sources, 2016, 327, 401~407
2. S. W. Park, K. Bae, J. W. Kim, G. B. Lee, B.-H. Choi, M. H. Lee, J. H. Shim, “Chemical Protection of Polycarbonate Surfaces by Atomic Layer Deposition of Alumina with Oxygen Plasma Pretreatment”, Advanced Materials Interfaces, 2016, 3(21), 1600340
3. K. Bae, H.-S. Noh, D. Y. Jang, J. Hong, H. Kim, K. J. Yoon, J.-H. Lee, B.-K. Kim, J. H. Shim, J.-W. Son, “High-performance thin-film protonic ceramic fuel cells fabricated on anode support with non-proton-conducting ceramic matrix: structural and electrochemical properties”, Journal of Materials Chemistry A, 2016, 4, 6395~6403
4. (Co-first) K. Bae, S. Lee, D. Y. Jang, H. J. Kim, H. Lee, D. W. Shin, J.-W. Son, J. H. Shim, “High-performance protonic ceramic fuel cells with thin-film yttrium-doped barium cerate–zirconate electrolytes on compositionally gradient anodes”, ACS Applied Materials & Interfaces, 2016, 8(14), 9097~9103
5. G. D. Han, K. C. Neoh, K. Bae, H. J. Choi, S. W. Park, J.-W. Son, J. H. Shim, “Fabrication of lanthanum strontium cobalt ferrite (LSCF) cathodes for high performance solid oxide fuel cells using a low price commercial inkjet printer”, Journal of Power Sources, 2016, 306, 503~509
Year 2015
1. K. Bae, H.-S. Noh, D. Y. Jang, M. Kim, H. J. Kim, J. Hong, J.-H. Lee, B.-K. Kim, J.-W. Son, J. H. Shim, “Fabrication of NiO-Y:BaZrO3 composite anode for thin film-protonic ceramic fuel cells using tape-casting”, Journal of the Korean Ceramic Society, 2015, 52(5), 320~324
2. H. K. Kim, D. Y. Jang, J. W. Kim, K. Bae, J. H. Shim, “Ionic properties of ultrathin yttria-stabilized zirconia thin films fabricated by atomic layer deposition with water, oxygen, and ozone”, Thin Solid Films, 2015, 589, 441~445
3. H. J. Choi, K. Bae, D. Y. Jang, J. W. Kim, J. H. Shim, “Performance degradation of lanthanum strontium cobaltite after surface modification”, Journal of The Electrochemical Society, 2015, 162(6), F622~F626
4. H. J. Jeong, J. W. Kim, K. Bae, H. Jung, J. H. Shim, “Platinum-ruthenium heterogeneous catalytic anodes prepared by atomic layer deposition for use in direct methanol solid oxide fuel cells”, ACS Catalysis, 2015, 5(3), 1914~1921
5. D. Y. Jang, H. K. Kim, J. W. Kim, K. Bae, M. V. F. Schlupp, S. W. Park, M. P., J. H. Shim, “Low-temperature performance of yttria-stabilized zirconia prepared by atomic layer deposition”, Journal of Power Sources, 2015, 274, 611~618
Year 2014
1. K. Bae, K. S. Son, J. W. Kim, S. W. Park, J. An, F. B. Prinz, J. H. Shim, “Proton incorporation in yttria-stabilized zirconia during atomic layer deposition”, International Journal of Hydrogen Energy, 2014, 39(6), 2621~2627
2. K. Bae, D. Y. Jang, H. J. Jung, J. W. Kim, J.-W. Son, J. H. Shim, “Micro ceramic fuel cells with multilayered yttrium-doped barium cerate and zirconate thin film electrolytes”, Journal of Power Sources, 2014, 248, 1163~1169
3. K. Bae, D. Y. Jang, S. M. Choi, B.-K. Kim, J.-H. Lee, J.-W. Son, J. H. Shim, “Influence of background oxygen pressure on film properties of pulsed laser deposited Y:BaZrO3”, Thin Solid Films, 2014, 552, 24~31
4. H. Jung, K. Bae, D. Y. Jang, Y. H. Lee, S. W. Cha, J. H. Shim, “Evaluation of porous platinum, nickel, and lanthanum strontium cobaltite as electrode materials for low-temperature solid oxide fuel cells”, International Journal of Hydrogen Energy, 2014, 39(31), 17828~17835
5. G. D. Han, H. J. Choi, K. Bae, J. H. Shim, “Evaluation of batteries for wind-hybrid systems in South Korean islands”, International Journal of Precision Engineering and Manufacturing, 2014, 15(4), 761~768
Year 2013
1. H. J. Choi, G. D. Han, J. Y. Min, K. Bae, J. H. Shim, “Economic feasibility of a PV system for grid-connected semiconductor facilities in South Korea”, International Journal of Precision Engineering and Manufacturing, 2013, 14(11), 2033~2041
2. K. S. Son, K. Bae, J. W. Kim, J. S. Ha, J. H. Shim, ”Ion conduction in nanoscale yttria-stabilized zirconia fabricated by atomic layer deposition with various doping rates”, Journal of Vacuum Science and Technology A, 2013, 31(1), 01A107
Year 2012
1. K. Bae, J. H. Shim, “Economic and environmental analysis of a wind-hybrid power system with desalination in Hong-do, South Korea”, International Journal of Precision Engineering and Manufacturing, 2012, 13(4), 623~630
2. K. P. Kim, K. Bae, K. H. Kim, J. H. Shim, ”Reduction of residual thermal stress on anode supported SOFCs using porous aid layers”, International Journal of Precision Engineering and Manufacturing, 2012, 13(12), 2149~2154
Patents
1. Apparatus for selectively depositing atomic layer for local area on the substrate, Patent No. 10-1715223, South Korea (2017.03.06.)
2. Protonic ceramic fuel cells and manufacturing method thereof, Patent No. 10-1680626, South Korea (2016.11.23.)
3. Selective area atomic layer deposition apparatus, Patent No. PCT/KR2016/001938, International (2016.02.26.)
4. Metal threaded fastener, Patent No. 10-2015-0051899, South Korea (2015.04.13.)